Q1. What does Hydraulink Manufacture?
Hydraulink have a manufacturing facility located in Penrose, Auckland that produce a range of hose tails, ferrules and adaptors. This facility is geared to provide customer specific solutions, particularly where the design requirements are outside the usual catalogued range.
Hydraulink branded hose is manufactured by a highly respected independent European manufacturer. Gates branded hose is manufactured by Gates Rubber in the USA. Many additional accessories are imported from world renown suppliers. Details are listed on our website under “Products”.
Q2. Who owns Hydraulink?
Hydraulink is privately owned by Lee Short and Noel Davies. They purchased the business in 1989. For a more detailed history of Hydraulink please visit the company history section of the website.
Q3. When did Hydraulink start?
Hydraulink traces its beginnings back to 1945. A more detailed history can be found under company history.
Q4. Where is Hydraulink located?
Hydraulink has over 300 outlets and over 250 mobile vans operating in Australasia. Full location details are on this website. These are predominantly independently owned franchise outlets.
Hydraulink also owns several outlets. Head offices are in Penrose, Auckland and Smithfield, Sydney. Hydraulink also owns or has interests in some retail outlets.
Q5. Why Hydraulink?
It is a big claim to say were Best Under Pressure but at Hydraulink, with over 50 years of experience in the fluid connectors industry, and distribution and service outlets throughout Australia, New Zealand and the Asia-Pacific region, we reckon we've earned it.
Any application where optimum performance from hydraulic systems and hoses is critical, Hydraulink are there, manufacturing and distributing hydraulic hoses, fittings, couplers, tube assemblies, adaptors and accessories. If you are involved in mining, agriculture, transport, forestry, the marine industry or any industry that needs fast, effective and reliable hose and hydraulic services - we can help you get the job done no matter how much pressure youre under.
Q6. What can Hydraulink do for you?
Service & Distribution Network
If your business depends on high quality, fully functional hoses, hydraulics and fluid connectors, you need Hydraulink.
Contact any of our comprehensive network of over 300 Hydraulink hose shops and distributors, for everything you need throughout Australia, New Zealand and the South Pacific.
Mobile Service Vans
Our network of over 250 Mobile Service Vans offer on the spot repair and replacement of worn or damaged hose assemblies.
We reduce downtime and get your vital machinery up and running by being there when you need us with 24/7 Mobile Service.
Wherever you are, whenever a problem hits, we'll fix it so you can get your job done on time.
You can always obtain the hose assembly or fitting you need to get the job done without having to compromise and settle for second best, and we guarantee our products and workmanship.
Assurance of Quality
Hydraulink hose assemblies are tested to both DIN & SAE standards using the latest European test equipment. Testing of hose assemblies can be done specifically to meet customer requirements. OEM Hose Kit Hose Kits are manufactured to customer requirements. Customised hose kits for OEM is our speciality. Hydraulink's unique OEM bagging system ensure ready identification of the product and our customers know that the Hose Assemblies in the bag are not only correct and labelled but they have also been cleaned and sealed to prevent contamination.
Hydraulic and Industrial Hose Management Programme
Hydraulink's ultimate solution to the ongoing problems of downtime, excessive maintenance and replacement costs.
We customise a hydraulic and industrial hose management programme tailored to your operation, to increase productivity and reduce costs, while increasing site safety and reducing inventory.
Hydraulink can develop a range of custom solutions for your operation, whatever your requirements. An example are the on-site container workshops we have set up for a number of contractors and mining operations. This system provides stock of hose and fittings complete with the necessary assembly equipment, tailored to your needs.
We manufacture standard and specialised hydraulic fittings to international quality.
Q7. Who do I contact to become a Hydraulink distributor?
To find out more about becoming a Hydraulink distributor please contact the Head Office in New Zealand or Australia. Please call either of the contacts below to discuss in confidence.
New Zealand CEO – Robin Simpson Ph +64 9 525 2626 or email firstname.lastname@example.org
Australia Managing Director - Denis Matulin Ph +61 437 396 427 or email email@example.com
Q8. How do I apply to be a Hydraulink Sales and Service Technician with my own business?
To find out more about becoming a Hydraulink Sales and Service Technician click here. For more information please contact Hydraulink in confidence or look at the Careers section.
Q9. What qualifications do I need to be a Hydraulink Sales and Service Technician?
A mechanical trade’s background is preferable but applicants with mechanical aptitude are also very successful.
To view our current opportunities, visit Careers.
Q10. What type of fittings are stocked?
For our comprehensive range of Hydraulink hose, fittings and adaptors, please click here to browse our online product catalogue.
Q11. What brand of hose does Hydraulink stock?
Hydraulink stocks their own branded hose which is manufactured in Europe, and Gates hose which is manufactured in the USA. More information is available on our website under “Products”.
Our hose meets or exceeds the following standards depending on the hose type.
ABS, AS, DIN, DNV, EN, GL, IJS, RCCC, SAE, DOT/FMVSS, MSHA & USCG
Q12. What quality standards does Hydraulink comply with?
Hydraulink meets most international recognised quality assurance standards. Please visit the Our Quality section of the website to view details on the quality and testing of fittings and hose.
Q13. What testing is carried out?
Hydraulink has latest BIMAL hose assembly testing facility which proof tests to international specifications J 343 and meets SAE 517 and EN 856. This testing is carried out in specially built facility operating 24 hours a day 7 days a week. For more information click Our Quality.
Q14. If I am not satisfied with my dealings with any Hydraulink outlet who do I contact?
Please direct your enquiry/complaint to:
Darin Pillay (firstname.lastname@example.org) or phone 09 525 2626